8
MN-36246 • Rev 3 • 03/17 • 1000-MR2 Refrigerated Carts
Installation
Appliance should not be tipped on its side.
If tipped, unit must stand in the upright
position for a minimum of 12 hours
before operating. Tipping will damage
the appliance and void the warranty if not
allowed to "rest"
.
If unit must be tipped, use extreme care.
Block casters to prevent unit from rolling
while lowering or lifting.
CAUTION
Appliance and accessories may be
heavy. To prevent serious injury,
always
use a suff icient number of trained and
experienced workers when moving or
leveling appliance and handling accessories.
Position the refrigerated cart to allow sufficient air
ventilation through the condensing unit(s).
Avoid installing the chiller immediately adjacent to fryers,
charbroilers, or any other equipment producing grease
laden air; heat producing equipment such as ovens and
ranges; and steam discharging equipment such as steamer
ovens and kettles. Do not locate the refrigerated cart in
direct sunlight.
Installation
Prior to moving the refrigerated cart to the installation site,
check the dimensions of doors, passageways, and ceiling
heights in the areas through which the cabinet must be
moved. Also check the turning radius if the cabinet must be
moved around an existing structure. The use of a fork lift
or pallet lift truck is required for moving and leveling most
refrigerated cart models.
NOTE
:
In certain instances, it may be necessary to remove
doors and door hardware to negotiate tight spaces.
This unit must be placed on a level floor to ensure the
automatic door closing and correct draining of condensate.
WARNING
Improper installation, alteration, adjustment, service,
cleaning, or maintenance could result in property
damage, severe injury, or death.
Read and understand the installation, operating and
maintenance instructions thoroughly before installing,
servicing, or operating this equipment.
Clearance Requirements
Full perimeter bumper accommodates all
clearance requirements.
WARNING
– Do not store explosive substances such as aerosol cans with a flammable propellant inside the appliance.
WARNING
– Keep clear of obstruction all ventilation openings in the appliance enclosure or in the structure for
building-in.
WARNING
– Do not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
WARNING
– Do not damage the refrigerant circuit.
WARNING
– Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of
the type recommended by the manufacturer.