3
Example 2
Example 3
Connect the left and right output of your DJ mixer, controller, etc. to
Input
1
of each
loudspeaker using XLR or 1/4” (6.35 mm) TRS cables.
Tip:
To send the same mix to both TS2W Series loudspeakers, connect both channels of your
DJ mixer, controller, etc. to the
Input
1
and
Input
2
of one loudspeaker, and then connect that
loudspeaker’s
Mix Out
to the
Input
1
of the other loudspeaker. Both TS2W Series
loudspeakers will then play identical summed mono mixes.
Microphone
Guitar
with
active
pickup
Connect a dynamic microphone to the
Input
1
using an XLR or 1/4” (6.35 mm) TRS cable.
Connect a guitar with an active pickup to the
Input
2
using a 1/4” (6.35 mm) TS or TRS cable (see your
guitar’s documentation for cable requirements).
Note:
When using the TS2W Series loudspeaker
with a guitar, we recommend using one with
active
pickups rather than passive pickups. If you use a
guitar with passive pickups, connect it to an
external preamp or direct input (DI) box, and
connect the line-level output to the loudspeaker.
Also, use dynamic microphones with the TS2W
Series loudspeaker rather than condenser
microphones. If you use a microphone that
re48 V of phantom power, connect it to an
external phantom power supply before connecting
it to the loudspeaker.
Power
DJ controller,
Mixer, etc.
Power
Содержание TS212W
Страница 40: ...Manual Version 1 0 ...
