Alto Professional Stealth Pro, Руководство пользователя

Страница: 11 / 64

11
Features
Transmitter
Front Panel
1.
Power Switch: This switch turns the
transmitter on or off.
2. Display: This display shows the current
channel, frequency, and AF volume
level. See
Display for more information.
3. Up/Down (+/–): Use these buttons to
adjust the selected value on the
Display .
4. Volume: Press this button to adjust the incoming signal level.
5. Sync: Press this button to automatically synchronize with the receiver. See Operation for more
information.
6. Freq: Press this button to manually select the RF frequency and channel for each stereo channel.
The selected channel will flash on the Display . See Operation for more information.
i. Press once to manually adjust the Left Channel.
ii. Press a second time to manually adjust the Right Channel.
iii. Press a third time to exit manual frequency adjustment mode.
Display
1.
AF: This meter shows the current audio signal
level received from the Combo Inputs.
2. Frequency: This is the current RF frequency in
MHz .
3. Channel (region specific): This is the current RF
channel number. The number of available
channels depends on your region.
Rear Panel
1.
Power Connector: Connect the
included 12 V, 1.0 A power adapter
here.
2. Combo Inputs: Connect balanced or
unbalanced 1/4” (6.35 mm) or XLR line-
level sources here.
3. Mono/Stereo Select: Adjust this switch to change the wireless signal that is sent to the receiver
to be either mono or stereo.
4. Antenna Terminals: Attach the BNC antennas to these connectors. Place the antennas in a
vertical position for best results in transmitting the wireless signal. If the wireless signal quality is
poor, change the position of the antennas.
1 1
2 2
3 3
1
2 3
4
5
6
1
2
3
4
4