I N S T A L L A T I O N A N D I N S T R U C T I O N M A N U A L
8
RESOLUTION
is selectable as either:
8 Bit
(one DMX channel per color) this is normal resolution,
or
16 Bit
(two DMX channels per color Fine high resolution similar to moving lights).
MASTER
is selectable as
ON
or
OFF
and provides a Master fade channel that dims all 3 UV pods
proportionally at the same time in order to maintain the color.
SMOOTHING
is selectable as
ON
or
OFF
and provides a smooth transition ramp from one level to
another in a similar way to how an incandescent lamp behaves. This helps to eliminate the "steppiness"
associated with LED fixtures that is caused by the instantaneous response of LEDs.
STAND-ALONE EFFECTS
(does not require a control console):
Note: stand-alone effects from a single unit will control other units connected via DMX cable to all
synchronize. Set other units to DMX Channel 001.
Note: (Do not use the Stand-Alone Effects while connected to a control console or a conflict will result.
Unless the Master-Slave mode has been disabled. See instructions below.)
Key: 1 = UV1 - UV LED Module One (Facing UV3, Left-most LED light module).
2 = UV2 - UV LED Module Two (Facing UV3, Center LED light module).
3 = UV3 - UV LED Module Three (Facing UV3, Right-most LED light module).
X = N/A - Not Available or Dark.
A = All three UV1, UV2, UV3 - UV LED Modules will come on.
UV Fades (700-799):
700 - 709
= 1>X>2>3 fade
700 = faster 709 = slower
740 - 749
= 3>2>4>1 fade
740 = faster 749 = slower
780 - 789
= 1>4>2>3>A fade
780 = faster 789 = slower
790 - 799
= A>3>2>4>1 fade
790 = faster 799 = slower
UV Strobes
(
800-879):
800 - 809
= ALL STROBE
800 = faster 809 = slower
810 - 819
= 1 STROBE
810 = faster 819 = slower
820 - 829
= (Reserved)
820 = faster 829 = slower
830 - 839
= 2 STROBE
830 = faster 839 = slower
840 - 849
= 3 STROBE
840 = faster 849 = slower
850 - 858
= 1-4-2-3 RAINBOW STROBE
850 = faster 859 = slower
870 - 879
= 3-2-4-1 RAINBOW STROBE
870 = faster 879 = slower
