Altman Spectra-PAR SS-PAR-100, Инструкция по установке и эксплуатации

Страница: 9 / 10

I N S T A L L A T I O N A N D I N S T R U C T I O N M A N U A L
9
STAND-ALONE EFFECTS
(does not require a control console):
Note: stand-alone effects from a single unit will control other units connected via DMX cable to all
synchronize. Set other units to DMX Channel 001.
(Do not use the Stand-Alone Effects while connected to a control console or a conflict will result.)
Color Fades (700-799):
700 - 709
= R>A>G>B fade 700 = faster 709 = slower
740 - 749 = B>G>A>R fade 740 = faster 749 = slower
780 - 789 = R>A>G>B>W fade 780 = faster 789 = slower
790 - 799 = W>B>G>A>R fade 790 = faster 799 = slower
Strobes
( 800-879):
800 - 809
= WHITE STROBE 800 = faster 809 = slower
810 - 819 = RED STROBE 810 = faster 819 = slower
820 - 829 = AMBER STROBE 820 = faster 829 = slower
830 - 839 = GREEN STROBE 830 = faster 839 = slower
840 - 849 = BLUE STROBE 840 = faster 849 = slower
850 - 858 = R-A-G-B RAINBOW STROBE 850 = faster 859 = slower
870 - 879 = B-G-A-R RAINBOW STROBE 870 = faster 879 = slower
Fixed Color Mode:
This is a special mode that allows you to manually select colors for a single unit using the 3 keys.
To enter Fixed Color Mode (or exit to Normal Mode) :
>Wait a few seconds until the display goes blank,
> press and hold the [ ONES ] button
> press and hold the [ TENS ] button
> release the [ ONES ] button
> release the [ TENS ] button.
STAND-ALONE FIXED COLOR MODE
While in stand-alone mode, the hundreds button cycles through 'r', 'G', 'b', and 'A'. colors . The tens and
ones digits select 0-99 values. 99 is actually full. The 0-255 scale is spread evenly over the 0-99 display
range.
NOTE: when you go in or out of fixed color mode, the display will go blank. Touch any button to turn
on display.