Installation & User’s Manual
Gallery Series LED Luminaires
s
18
Operation
Gobo Slot
Gallery Series LED Luminaires with zoom spot lenses offer a gobo slot (
Figure 13
) to hold one E-size
gobo with the dimensions of 37.5 mm OD with a 28 mm image area. Gobo holder is included with all zoom
spot models and can be purchased as an additional accessory.
IMPORTANT!
Please note that some gobos, depending upon their reflectivity level may need to be
blackened in order to obtain superior projections. Additional beam shaping is obtained through the four (4)
integrated shutters.
Beam Wash Models
Beam wash models offer a variable beam angle of 15 to 60 degrees and a end of lens accessory holder
(see
"Accessory Holder - All Models" on page 19
for more information on the accessory holder).
Beam Angle Adjustment
Gallery Series LED Luminaires that have the beam wash lens are designed and are ideal to project a soft
edge, even beam of light. For beam wash models, beam shaping is achieved through external, four-flap
barn doors (sold separately).
To adjust the beam angle, simply loosen, do not remove, the beam angle knob as illustrated in
Figure 14
.
Once the desired angle is achieved, re-tighten the beam angle knob.
Note:
Keeping the beam angle knob loose and slightly snug will allow smooth movement of the lens along
the lens tube when making adjustments. Loosening the knob too much will make fine/precision
adjustments difficult and may misalign the lens.
Figure 14: Beam Wash Models - Beam Angle Adjustment
Flood Models
Flood models offer a fixed beam angle of 85 degrees and a end of lens accessory holder (see
"Accessory
Holder - All Models"
below for more information on the accessory holder). For flood models, beam
shaping is achieved through external, four-flap barn doors (sold separately).
Zoom Spot
Models
Beam Wash
Models
Beam Wash
Models
Beam Angle Knob
Front of Luminaire
Beam Wash Basic Settings
Spot Position (15 Degrees)
Flood Position (60 Degrees)
Flood
Models