Altis ICONA, Руководство пользователя

Страница: 11 / 22

10
automatic increases or decreases.
6. “SPEED: 3. 6. 9” are shortcut keys for speed which can set the speed quickly.
QUICK START( MANUAL MODE)
1. Turn on the power switch, put the safety key on computer panel correctly.
2. Press “START” key, the window will display: 3-2-1, a buzzer will sound, at the same time, the treadmill will
run at the lowest speed.
3. Press “SPEED+”
、
“SPEED -” to adjust speed as necessary after starting the treadmill.
OPERATING DURING RUNNING
1. Press “speed-“ will decrease the treadmill’s running speed.
2. Press “speed+“ will increase the treadmill’s running speed.
3. Press “stop”, the treadmill will slow down until stop.
4. When runner hold the handle bar with hand pulse 6 seconds, it will show the heartbeat data.
MANUAL MODE
1. Under standby mode, press “START”, the treadmill start run at speed 0.8km/h, other windows start counr
from zero, press “speed+”, “speed-” to adjust speed.
2. Under standby mode, press “mode” to enter time countdown mode, “TIME” window flicker, press
“speed+”,“speed-”to set running time, the range is 5:00-99:00.
3. Under time countdown mode, press “mode” to enter dictance countdown mode, the “DIS” window flicker,
press “speed+”, “speed-”to set distance, the range is 0.50-99.50.
4. Under dictance countdown mode, press “mode” to enter calorie countdown mode, the “CAL” wiindow
flicker, press “speed+”, “speed-”to set distance, the range is 10.0-995.0.
5. Select one of three countdown mode then press START, the treadmill will run in 3 seconds. Press“SPEED+”
、
“SPEED -”to adjust speed. Press STOP to stop running.
BUILT-IN PROGRAM
The treadmill is with 12 programs from P01 to P12. Uder ready state, press “PROGRAM”, the window show
“P1-P12”. After choose your favor mode, time window will flicker and show the setting time, press “SPEED+”,
“SPEED-” to set running time. Then press ”START” to start the program. The built-in program divide into 20
sections. Per running time=setting time/20. When enter the next time section, you will hear “Bi-Bi- Bi-”. The
speed will change by programs. During that, you can adjust the speed by pressing “SPEED+”, “SPEED -”. But
when enter to next time section, the speed will the same as last time section. Finishing the program, the
system will sound as “B i-B i- B I”. The treadmill slow down till show “END”. It will enter standby mode in 5
seconds.