TNP600
TNP600
TNP600
TNP600
User’s Guide
400-0493-002
8
7. Operation
7.1 Opening and Closing the TNP600
The TNP600 will open easily when the top is pressed down and then
released.
When the TNP600 is not in use, simply press the top down until it is level
with the surface of the table and then release. The unit will remain hidden
until needed again.
7.2 Power/Signal Connections
Connect external devices to the appropriate connector on the TNP600.
Remember, the devices plugged into the AC power connectors should not
draw more than 600W of power.
8. Troubleshooting Guide
The TNP600 supplied was carefully tested and no problems were detected.
However, we would like to offer the following suggestions:
•
Please make sure that the highest quality network cables are used.
•
Make sure that no cable or power cord is damaged or pinched. If
there has been damage, do not use the TNP600. Please call the
ALTINEX Customer Service Department at (714) 990-2300 to have
the unit repaired.
•
If the unit does not rise into position correctly, check the service
loops for the signal and power cords on the bottom of the unit
