RT300-155
User’s Guide
400-0604-003
7
Diagram 5: CNK200/221 Installation
Install the bracket with the RT300-155 in a position such that the retact cable is under the grommet openings on CNK plates.
Pull the cable through the bottom of the CNK body and faceplate.
7. Operation
7.1 Accessing the RT300-155 USB Retractable Cable
After installation, no further configuration is needed. To
connect, simply open the CNK bezel and pull on the retractable
cable.
Connect to a desired source. When finished, disconnect the
cable and gently pull and release cable and it will retract back
into the bezel.
8. Troubleshooting Guide
The RT300-155 USB Retractable Cable supplied was carefully
tested and no problems were detected. However, we would
like to offer the following suggestions:
Please make sure that the highest quality cables are used in
addition to the retractable cable.
Make sure that no cable or power cord is damaged or pinched.
If there has been damage, do not use the CNK200 or the
retractable cable. Please call the Altinex Customer Service
Department at (714) 990-2300 to have the unit repaired.
