MULTITASKER
400-0394-007
17
38.
[RMG]
This command deletes one or all groups.
Command Format: [RMGk]
Gk = Group ID (k = # from 1-8, * for all)
Example:
Remove all cards from G52 by sending [RMG5].
The system will return the following feedback:
[G5=0]
Example 2:
Remove all cards from all groups, effectively
deleting all groups, by sending [RMG
*
]. The
system will return the following feedback:
G1-G8: EMPTY
39.
[RD]
This command reads and then displays the
members in a group.
Command Format: [RDGk]
Gk = Group ID (k = # from 1-8)
Example:
C2, C4, and C6 make up G5. Read the member
data for G5 by sending the command [RDG5].
The system will return feedback as follows:
[G5=C2C4C6]
The feedback shows G5 and then the cards that
make up G5. In this case, G5 includes C2, C4,
and C6.
7.3 SUMMARY OF COMMANDS
Basic Commands
1)
[C]
Display card status
2)
[CnS]
Save card settings
3)
[CLR]
Restore saved settings
4)
[FRESET]
Reset to factory defaults
5)
[VER]
Display software version
6)
[HELP]
Display available commands
Feedback Commands
7)
[FBD]
Feedback delay
8)
[?]
Display system cards
9)
[?C]
Display card information
10) [STA1]
Enable auto feedback
11) [STA0]
Disable auto feedback
Card Control
12) [IN]
Select input port
13) [INR]
Select input and recall
14) [MODER]
Set output resolution
15) [BRIGHTm] Set/select brightness
16) [BRIGHT]
Display/select brightness
17) [CONTRm] Set/select contrast
18) [CONTR]
Display/select contrast
19) [COLORm] Set/select color
20) [COLOR]
Display/select color
21) [SHARPm] Set/select sharpness
22) [SHARP]
Display/select sharpness
23) [HUEm]
Set/select hue
24) [HUE]
Display/select hue
25) [MODET]
3D comb filter
26) [MODEN]
Noise reduction
27) [MODEA]
Aspect ratio
28) [FREEZ]
Freeze image
29) [ + ]
Increment property by 1
30) [ - ]
Decrement property by 1
ID Commands
31) [RSI]
Reset Card IDs to defaults
32) [SIDn]
Set all Card IDs
33) [SIDnCi]
Set one Card ID
34) [SID+]
Set all Card IDs to an offset
35) [RSN]
Display card slot number
