MULTI-TASKER
2
PRECAUTIONS / SAFETY WARNINGS
1
Please read this manual carefully before using
your
MT108-104/(105)
Line Driver. Keep this
manual handy for future reference. These safety
instructions are to ensure the long life of your
MT108-104/(105)
and to prevent fire and shock
hazard. Please read them carefully and heed all
warnings.
1.1 GENERAL
•
Qualified ALTINEX service personnel, or their
authorized representatives must perform all
service.
1.2 INSTALLATION
•
To prevent fire or shock, do not expose this
unit to rain or moisture. Do not place the
MT108-104/(105)
in direct sunlight, near
heaters or heat radiating appliances, or near
any liquid. Exposure to direct sunlight,
smoke, or steam can harm internal
components.
•
Handle the
MT108-104/(105)
carefully.
Dropping or jarring can damage the card.
•
Do not pull the cables that are attached to the
MT108-104/(105)
.
•
Insert the card carefully into the slots of the
Multi-Tasker™ without bending any edges.
•
When removing a card, please make sure
that the expansion
card to which it is attached
is also pulled out simultaneously.
1.3 CLEANING
•
Clean only the connector area with a dry
cloth. Never use strong detergents or
solvents, such as alcohol or thinner. Do not
use a wet cloth or water to clean the card. Do
not clean or touch any component or PCB.
1.4 FCC / CE NOTICE
•
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
•
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and
used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the
interference at his own expense.
•
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could
void the user’s authority to operate the
equipment.
