CNK200 Interconnect Box
User’s Guide
400-0111-009
7
Diagram 4: Twenty-Three (23) Hole Sets
The CNK200 can be customized for virtually any configuration required. Inside, there are 23 hole sets available for installing
preconfigured plates, customizable plates, or retaining brackets for holding cables.
In some cases, it is desirable to have the cables reside in the Cable-Nook instead of requiring the user to provide their own cables. In
this case, retaining brackets can be positioned to keep cables installed under the table from falling below the Cable-
Nook’s interior
shelf. The user simply pulls out the cable(s) needed and connects them to a laptop, iPod, etc.
Shown below are some typical plate options with retaining brackets. See our website at
for a complete list of available
plates and customizable snap-in connectors.
23 HOLE SETS
WITH LID OPEN
TOP INSIDE VIEW
RETAINING
BRACKETS
PLATES
POWER
CUSTOMIZABLE
SNAP-IN PLATES
TO HOLD CABLES
STANDARD
PLATES
