3x1 Wallplate Transmitter Switcher with HDMI and VGA
Altimium 13 www.altimium.com
50781%
Enable EDID user-defined mode.
Uploading the user-defined EDID
file by Micro-USB port within 10
seconds.
EDID: USER USB UPGRADE
50782%
Invoke the user-defined EDID.
EDID: USER
50783%
EDID bypass.
EDID: BYPASS
50784%
Get the current EDID.
EDID:1920x1200@60, 2CH
EDID:1360x768@60
EDID:1080P, 2D 2CH
EDID:4K30, 2D 2CH
EDID:1280x720@60, DVI
EDID:1920x1080@60, DVI
EDID:1280x720@60
EDID:1280x800@60
EDID:INITIAL
EDID: USER
EDID: BYPASS
6.3.7 CEC Control
The switcher also supports sending of a few common CEC commands using RS232
command code. Specific CEC command can also be sent from the switcher. The
RS232 commands are as given in the following table. Please note that only CEC
enabled devices that have the specified logical address will respond to CEC
commands.
Command
Function
Feedback Example
50733%
Display on.
CEC DISPLAY ON
50734%
Display off.
CEC DISPLAY OFF
CEC
<xx:xx:xx...
.>
Send
CEC command “xx:xx:xx…”
to control display device.
CEC <xx:xx:xx…>
