3x1 Wallplate Transmitter Switcher with HDMI and VGA
Altimium 10 www.altimium.com
6.2 RS232 Control Software
Installation:
Copy the control software file to the control PC
.
Uninstallation:
Delete all the control software files in corresponding file path.
Basic Settings:
Connect TP70WPBH-EU with all input devices and output devices needed, then to
connect it with a computer which is installed with RS232 control software. Double-click
the software icon to run this software.
Here take the software
CommWatch.exe
as example. The icon is showed as below:
The interface of the control software is showed as below:
Please set the parameters of COM number, bound rate, data bit, stop bit and the parity
bit correctly, and then you are able to send command in command sending area.
Parameter configuration area
Monitoring area, show the commands
and its feedback information.
Command sending area
