Altimium
4K HDBaseT
TM
Repeater
www.altimium.com
2
2. Product Appearance
2.1 Front Panel
Figure 2-1 Front Panel
No.
Name
Description
①
Power
indicator
Illumine red when powered on.
②
HDMI 1
Illumine green when the HDMI 1 signal output normally.
③
HDMI 2
Illumine green when the HDMI 2 signal output normally.
④
ID PRESET
DIP switcher to assign the Unit ID (Range: 0~9/A~F).
2.2 Rear Panel
Figure 2-2 Rear Panel
No.
Name
Description
①
HDBT IN
Connects the HDBT output port of Matrix Switcher or HDBaseT
Transmitter.
HDCP indicator will turn yellow when the HDBaseT input
signal is transmitted with HDCP.
LINK indicator will turn green when the HDBaseT
TM
Repeater is connected with Matrix Switcher or
Transceiver successfully over CAT5e/6/7.
②
HDMI-1 OUT
Connects with HDMI display.
HDMI 2
HDMI 1
ID PRESET
1
2
3
4
L
R
Tx
Rx
HDCP
LINK
HDBT IN
HDMI-1 OUT
RS232-1
HDMI-2 OUT
RS232-2
AUDIO OUT
HDBT OUT
DC 12V
Tx
Rx
HDCP
LINK
1
2
3
4
5
6
7
8
