Altimium TP423L-4K, Руководство пользователя

Страница: 12 / 19

Altimium 4K HDBaseT
TM
Repeater
www.altimium.com 8
RS232 Control Mode Description
Point-to-Point
In this mode, control one of the devices which are connected
to RS232 ports of 4K HDBaseT
TM
Repeaters.
For example:
F1 AA 1F 32 ... ...
Send this command to control the device which is connected
to the “RS232-2” port of the 4K HDBaseT
TM
Repeater whose
Unit ID is 3.
One-to-Many
In this mode, control several devices which are connected to
RS232 ports of 4K HDBaseT
TM
Repeaters.
For example:
F1 AA 1F 01 E3 ... ...
Send this command to control three devices:

01: The “01” represents the device which is connected
to the “RS232-1” port of the 4K HDBaseT
TM
Repeater
whose Unit ID is 0.

E3: The “E3” represents the two devices which are
connected to both “RS232-1” and “RS232-2” ports of the
4K HDBaseT
TM
Repeater whose Unit ID is E.
One-to-All
In this mode, control all devices which are connected to
RS232 ports of 4K HDBaseT
TM
Repeaters and HDBaseT
Receiver at the same time.
For example:
F1 AA 1F FF ... ...
Note: When control the two devices which are connected to both “RS232-1” and
“RS232-2” ports of the 4K HDBaseT
TM
Repeater, it is normal that the feedback
code may be garbled.
4.2.2 Installation/uninstallation of RS232 Control Software

Installation
Copy the control software file to the control PC connected with HDBaseT
Transmitter.

Uninstallation
Delete all the control software files in corresponding file path.