Extender Scaler 3x1 + 1
www.altimium.com
Control at receiver
Connect a PC to the LAN/FW UPDATE port, and a projector to the
RS232 port of receiver
Receiver
Projector
PC
HDMI IN
HDMI OUT
Telnet Control
RS232 Cable
Blu-ray Player
2. Set serial port parameters
Suppose the RS232 control codes for your connected projector are as
follows,
Baudrate: 9600
Power on: 50 57 52 20 4F 4E 0D 0A
Power off: 50 57 52 20 4F 46 46 0D 0A
First, open your serial debugging tool in the PC, set the UART baudrate
to 9600.
Control at transmitter: enter command “
SET UART_INFO 9600 tx
”
and end it up with CR/LF, click “Send”.
