Extendeur Multiformat avec Extension USB pour Soft Codec
Altimium
RS232 Control
Advanced users may also choose to control the Softcodec through RS232
control port. A UART cable is needed to connect a PC or control system to
the softcodec. The API command for RS232 control is available below. A
professional RS232 serial interface software may be needed as well.
Before executing the API command, please ensure the RS232 interface and
the control PC are configured correctly.
Parameters
Value
Baud Rate
115200 bps
Data Bits
8 bit
Parity
None
Stop Bits
1 bit
Flow Control
None
API Command List
Please refer to the separate document “API Command Set_TX & RX ”.
