Extendeur Multiformat avec Extension USB pour Soft Codec
Altimium
Auto Switch
Softcodec allows users to attend the web UI to set the auto switch on/off. (For
more information, please refer to Web UI section.)
When the auto switch is on: (On is by default)
Once power is restored, it will automatically switch to the source selected
before power restored only if there is no active source before, under this
situation, the units will output signal following priority order: VGA > DP >
TX HDMI IN > USB-C > RX HDMI1> RX HDMI2.
When there is a new source input during operation, the units will priority to
output this source.
Once power is restored, it will switch to the next highest priority source, if
there is no other source, it will remain the current source signal.
When the auto switch is off:
Users switch the source only by manual.
