Altigen iFusion SmartStation, Руководство пользователя

Страница: 18 / 26

14 iFusion SmartStation User Manual
Problem
The iPhone call is not going through the iFusion.
Possible Cause Remedy
The iFusion may not be
connected to your
iPhone. Check whether the Bluetooth button is blinking. A slow
blinking light means the iPhone is not connected to the
iFusion. Try to re-pair the devices.
Check that the audio source on the iPhone is set to
iFusion.
On the iPhone, check that iFusion shows as a device
under
Settings > Bluetooth .
Problem
The computer does not recognize my iPhone when the iFusion is connected via a USB
cable.
Note: Before troubleshooting the iFusion USB connection, ensure that your iPhone works
correctly while it is directly connected to the computer.
The speaker is not con-
nected. Verify that the speaker cable is properly connected to
the 3.5mm stereo audio jack in the back of the iFu-
sion. You can disconnect the cable to hear music
through the iFusion speaker.
Possible Cause Remedy
The iPhone driver is not
installed on the computer. Install the iPhone driver by following the instructions
in the iPhone
User Manual .