Altherma EKHBHE008AA3V3 Скачать руководство пользователя страница 18

Operation manual

17

EKHBH/XE008AA3V3

Indoor unit for air to water heat pump system and options

4PW48442-1B

M

AINTENANCE

Important information regarding the refrigerant used

This product contains fluorinated greenhouse gases covered by the
Kyoto Protocol.

Refrigerant type:

R410A

GWP

(1)

 value:

1975

(1)

 GWP = global warming potential

Periodical inspections for refrigerant leaks may be required
depending on European or local legislation. Please contact your local
dealer for more information.

Maintenance activities

In order to ensure optimal availability of the unit, a number of checks
and inspections on the unit and the field wiring have to be carried out
at regular intervals, preferably yearly. This maintenance should be
carried out by your local Daikin technician.

Besides keeping the remote controller clean by means of a soft damp
cloth, no maintenance is required by the operator.

Standstill

T

ROUBLESHOOTING

The guidelines below might help to solve your problem. If you cannot
solve the problem, consult your installer.

No readings on the remote controller (blank display)

Check if the mains power is still connected to your installation.

One of the error codes appears

Consult your local dealer.

The schedule timer does work but the programmed actions are
executed at the wrong time (e.g. 1 hour too late or too early)

Check if the clock and the day of the week are set correctly,
correct if necessary.

D

ISPOSAL

 

REQUIREMENTS

Dismantling of the unit, treatment of the refrigerant, of oil and of other
parts must be done in accordance with relevant local and national
legislation.

Do not try to dismantle the system yourself: the dismantling of the
system, treatment of the refrigerant, of oil and other parts must be
done by a qualified installer in accordance with relevant local and
national legislation.

Units must be treated at a specialized treatment facility for re-use,
recycling and recovery. By ensuring this product is disposed off
correctly, you will help to prevent potential negative consequences for
the environment and human health. Please contact the installer or
local authority for more information.

During longer periods of standstill, e.g. during
summer with a heating only application, it is very
important NOT TO SWITCH OFF THE POWER
SUPPLY towards the unit.

Switching off the power supply stops the automatic
repetitive movement of the motor in order to prevent it
from getting jammed.

When the unit is turned off for some days during
winter, then this should be considered as a start-up at
low ambient temperature. Refer to the chapter "Start-
up at low outdoor ambient temperatures" in the
installation manual to ensure that the unit operates
within its operation range as soon as possible.

Your product is marked with this symbol. This means
that electrical and electronic products shall not be
mixed with unsorted household waste.

Содержание EKHBHE008AA3V3





















Отзывы: