Table of Contents
Carton Contents ............................................................................................................... 2
Altered
®
Pro-Line 600 Specifications ............................................................................... 2
ALTERED
®
SAFETY WARNINGS
– READ CAREFULLY ............................................... 3
OPERATION .................................................................................................................... 4
Preparation ........................................................................................................ 4
Charging the Battery .......................................................................................... 4
Adjust the B
oard’s Speed-Acceleration Performance (if desired) ...................... 4
Power On
– Board Link/Lock-On to Remote Control ......................................... 4
Acceleration & Braking with Remote Control ..................................................... 5
Low Battery Warning Beeps & Auto Shut-off ..................................................... 5
Riding Tips......................................................................................................... 5
REGULAR MAINTENANCE REQUIREMENTS ............................................................... 6
MAINTENANCE WARNING .............................................................................. 6
Tighten Fittings
– BUT DON’T OVERTIGHTEN ................................................ 6
Keep the Board Dry ........................................................................................... 6
Trucks & Bushings Are NOT Adjustable ............................................................ 6
Drive Wheel ....................................................................................................... 6
Battery Maintenance .......................................................................................... 6
Drive Belt ........................................................................................................... 6
Troubleshooting ............................................................................................................... 7
Altered
®
Electric Skateboard Warranty ............................................................................ 8
Carton Contents
1 Altered
®
Pro-Line 600 V2 wireless electric skateboard,
fully assembled
1 hand-held wireless remote control & 4 AAA batteries
1 Owner Manual
1 “Stop” Quick Reference Yellow Sheet
1 battery charger
Altered
®
Pro-Line 600 V2 Specifications
(Nov 2011)
Rider Capacity:240 lbs / 109 kg
Exkate patented torsion trucks
Net weight: 44 lbs / 20 kg
Range: up to 10 mi / 16 km on
flat surfaces
Dimensions: 41.3" x 10.5" /
104.5 cm x 26.5 cm
Motor: 36V DC / 600 Watt
Acceleration: 0 to 19 mph / 30
kph in 3 seconds
Controller: Wireless
handheld remote for smooth,
variable acceleration &
braking, including 3-position
switch for adjustable speed
range settings
Batteries: 12V 9.5 Amp / 3
in series
Braking: 19 mph / 30 kph to
0 in40 ft / 12.2 m
Charger: Input – 110-120
VAC Output – 36V DC / 2
amp
Turning radius: 8 ft / 2.5m
Protected by US Patents: USPTO No.5,893,425 and USPTO No.5,853,182
Troubleshooting
Issue
Problem / Cause
Solution
Skateboard
does not start
up
Skateboard controller is not
turned on.
Turn on.
The indicator light on the
charger is red.
Recharge the skateboard until the light turns green. If
light stays red, batteries are dead and cannot be
recharged, or the charger is broken and needs to be
replaced.
Board and Remote do not
link properly.
Turn board and remote off. Turn board on, turn remote
on, wait 5 seconds to establish connection. If board still
does not link, re-“pair” the units according to instructions
at
www.AlteredElectricSkateboards.com/re-pair.htm
No beep heard when
turning on controller; LED
does not light.
Batteries are not properly installed or are out of power on
remote. Reinstall or change batteries.
Skateboard
stops
automatically
after running
for some time.
Overheat / overload
protection of motor, usually
due to riding too many hills
or using too much brake.
Cool motor.
Low voltage protection of
controller.
Change or recharge battery.
Intermittent
power while
riding or
“Beep” sound.
Damaged remote from fall
or abuse.
Contact Exkate Service department.
Low battery on board
(“Beep…Beep…Beep…)
Recharge the battery. (Batteries may need replacement
after 80-150 recharge cycles.)
Low battery on remote
(“BeepBeep…BeepBeep…)
Replace with 4 AAA batteries. (If unit does not turn on
after replacement, reverse the order of the batteries).
Unable to
charge
skateboard.
No power, or charger has
overheated or charger does
not light.
Replace charger.
Board is not charged, but
charger always reads
“green” when plugged in.
Bad battery cell(s) or loose connection. Check
connections or replace bad cells
Strong
vibration and
/or loud, high-
pitched noise
when running.
Belt is loose or over- flexed.
Adjust the belt, fasten screw and nut, and adjust back
nut.
Bearing is damaged.
Change bearing.
Motor runs, but
drive wheel
does not turn.
Drive belt is broken.
Replace drive belt. See web site for complete
instructions:
www.AlteredElectricSkateboards.com/belt_install.htm
For other common issues visit Customer Support on our website:
http://www.AlteredElectricSkateboards.com/customersupport.htm
Always Wear a Helmet & Protective Gear!
2
7
