Chapter 2: Board Components
2–33
General User Interfaces
Altera Corporation
Stratix III 3SL150 Development Board
Power 7-Segment Display
The power measured by the MAX II CPLD and associated A/D is displayed on board
reference U27, which is a dedicated 7-segment display connected to the MAX II
CPLD, labeled
Power Display
.
lists the power 7-segment display component reference and manufacturing
information.
LCD Displays
The development board accommodates two LCD displays:
■
Character LCD
■
Graphics LCD
The character display is a 16-character, by 2-line LCD display. The graphics is a
128 × 64 pixel transmissive graphics LCD. The two displays have separate buses. This
section describes both displays.
Character LCD
The board contains a single 14-pin 0.1 in. pitch dual-row header, used to interface to a
16-character by 2-line LCD display, manufactured by Lumex (part number
LCM-S01602DSR/C). The LCD has a 14-pin receptacle that mounts directly to the
board’s 14-pin header, so it can be easily removed for access to components under the
display—or to use the header for debugging or other purposes.
summarizes the character LCD interface pins. Signal name and direction
are relative to the Stratix III FPGA. For functional descriptions, see
.
Table 2–31. Power 7-Segment Display Component Reference and Manufacturing Information
Board
Reference
Description
Manufacturer
Manufacturing
Part Number
Manufacturer
Website
U27
7-segment, green LED display
Lumex, Inc.
LDQ-M2212R1
Table 2–32. Character LCD (J22) Header I/O
Board
Reference
Description
Schematic
Signal Name
I/O
Standard
Stratix III
Pin Number
J22 pin 7
LCD data bus bit 0
LCD_DATA0
2.5 V AJ8
J22 pin 8
LCD data bus bit 1
LCD_DATA1
2.5 V AJ6
J22 pin 9
LCD data bus bit 2
LCD_DATA2
2.5 V AD13
J22 pin 10
LCD data bus bit 3
LCD_DATA3
2.5 V
AJ7
J22 pin 11
LCD data bus bit 4
LCD_DATA4
2.5 V
AF10
J22 pin 12
LCD data bus bit 5
LCD_DATA5
2.5 V
AN6
J22 pin 13
LCD data bus bit 6
LCD_DATA6
2.5 V
AN3
J22 pin 14
LCD data bus bit 7
LCD_DATA7
2.5 V
AK7
J22 pin 4
LCD data/command select
LCD_D_Cn
2.5 V
AP2
J22 pin 5
LCD write enable
LCD_WEn
2.5 V
AL8
J22 pin 6
LCD chip select
LCD_CSn
2.5 V
AD12