Figure 4-3 PCIe Fundamental Demo GUI
•
Make sure ‘Select FPGA Board’ appears as “VID=1172, DID=E001”.
•
Press
BUTTON0~BUTTON3
on the TR4 and click ‘Read Status’ in the application
software.
•
Check/Uncheck the LED0-3 in this application software and click ‘Set LED’. The LEDs
on the TR4 should light and unlight accordingly.
•
Click ‘Memory-Mapped Write and Read’ to test the memory –mapped DMA. A report
dialog will appear when the DMA process is completed.
•
Click ‘FIFO Write and Read’ to test the FIFO DMA. A report dialog box will appear
when the DMA process is completed.
•
The ‘Custom Registers Group’ is used to test custom design registers on the FPGA side.
Users can use this function to verify custom register design.
Demonstration Setup
•
Quartus II 11.1
21
Содержание PCA
Страница 1: ......
Страница 8: ...Figure 2 3 Block Diagram of PCA card 7 ...
Страница 25: ...To write and read FIFO memory call the functions 24 ...