Chapter 4
Set up on PCA
This chapter illustrates the set up for the PCA card (base on the TR4 Board). To purchase the TR4
board, please visit www.tr4.terasic.com.
18
4.1
4.1
Introduction
Introduction
The application reference design shows how to implement fundamental control and data transfer by
using
PCIE0
port on the TR4. In the design, basic I/O is used to read or write the buttons and LEDs
on the TR4. High-speed data transfer is performed by DMA. Both Memory-Mapped and FIFO
memory types are demonstrated in the reference design. The demonstration also makes use of the
associated PCIe cable adapter card (PCA).
4.2
4.2
System
Requirements
System Requirements
The following items are required for the PCA demonstration
•
TR4 board x1
•
PCA card x1
•
PCIe X4 Cable x1
•
PC x2
Demonstration Files Location
The demo file is located in the folder (on the TR4 CD):
TR4_PCIe0_Fundamental\demo_batch
The folder includes following files:
•
PC Application Software: PCIe_Fundamental_Demo.exe
•
FPGA Configuration File:
tr4_pcie0_fundamental.sof
•
PCIe Library : TERASIC_PCIE.DLL
•
Demo Batch File :
tr4_pcie0_fundamental
.bat
Содержание PCA
Страница 1: ......
Страница 8: ...Figure 2 3 Block Diagram of PCA card 7 ...
Страница 25: ...To write and read FIFO memory call the functions 24 ...
