
2–32
Chapter 2: Board Components
Components and Interfaces
Arria II GX FPGA Development Board Reference Manual
February 2011
Altera Corporation
Table 2–36
lists the Ethernet PHY interface component reference and manufacturing
information.
High-Speed Mezzanine Cards
The development board contains two HSMC interfaces—port A and port B. The
HSMC port B is only available if the Arria II GX FPGA development board is
populated with the EP2AGX260 device. By default, the board is populated with the
EP2AGX125 device and only HSMC port A is available. HSMC port A interface
supports both single-ended and differential signaling while HSMC port B interface
only supports single-ended signaling. The HSMC interface also allows JTAG, SMB,
clock outputs and inputs, as well as power for compatible HSMC cards. The HSMC is
an Altera-developed open specification, which allows you to expand the functionality
of the development board through the addition of daughtercards (HSMCs).
f
For more information about the HSMC specification such as signaling standards,
signal integrity, compatible connectors, and mechanical information, refer to the
High
Speed Mezzanine Card (HSMC) Specification
manual.
The HSMC connector has a total of 172 pins, including 120 signal pins, 39 power pins,
and 13 ground pins. The ground pins are located between the two rows of signal and
power pins, acting both as a shield and a reference. The HSMC host connector is
based on the 0.5 mm-pitch QSH/QTH family of high-speed, board-to-board
connectors from Samtec. There are three banks in this connector. Bank 1 has every
third pin removed as done in the QSH-DP/QTH-DP series. Bank 2 and bank 3 have
all the pins populated as done in the QSH/QTH series.
Figure 2–10
shows the bank arrangement of signals with respect to the Samtec
connector's three banks.
Table 2–36. Ethernet PHY Component Reference and Manufacturing Information
Board Reference
Description
Manufacturer
Manufacturing
Part Number
Manufacturer
Website
U24
Ethernet PHY BASE-T device
Marvell
Semiconductor
88E1111-B2-CAAIC000
www.marvell.com
Figure 2–10. HSMC Signal and Bank Diagram
Bank 3
Power
D(79.40)
-or-
LVDS
CLKIN2, CLKOUT2
Bank 2
Power
D(39:0)
-or-
D[3:0] + LVDS
CLKIN1, CLKOUT1
Bank 1
8 TX Channels CDR
8 RX Channels CDR
JTAG
SMB
CLKIN0, CLKOUT0
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from