Altera APEX DSP Development Kit, Руководство пользователя

Страница: 21 / 28

Altera Corporation 21
Getting Started APEX DSP Development Kit Getting Started User Guide
G
e
tti
ng St
ar
te
d
2
Figure 4. Connect the SMA Cable
Run the
Filtering
Design
The board comes pre-programmed with a filtering design. After
connecting the cables to the board, you can run the filtering design.
Additionally, Altera provides a Windows application for the filtering
design that lets you view the unfiltered and filtered signals without an
oscilloscope. To run the Windows application, perform the following
steps:
1. Press push-button SW1 or SW2 to make the user LED 2 (D8) blink,
verifying that the filtering design is loaded into the board.
2. Connect the SMA cable to D/A 1 and A/D 1. See Figure 4 on
page 21 .
3. Choose Run (Windows Start menu).
4. Click Browse .
5. Browse to the c:\MegaCore\dsp_development_kit-
v1.0.0\labs\filtering\application directory. (If you did not install
the software in the default location, adjust the path accordingly.)
6. Select the file Filter_App.exe .
7. Click Open .
8. Click OK . The Filter_app window opens.
SMA Cable
SMA Cable
Power
Cable