ALTER SM1150, Техническая заметка

Страница: 4 / 30

page 2 of 29
File: SM1150_r5eng - February 2007 - Technical note: SM1150
SM 1150
File: SM1150_r5eng - February 2007 - Technical note: SM 1150
page 3 of 29
SM 1150
Contents
A
Alarm codes table 27, 28
B
Buttons meaning 10
C
CE Declaration 1
Cleaning 7
Components List 19
Control menu configuration 12, 13
E
Environmental conditions 6
Equipment installation 7
Equipment Ratings 5
F
Fuses replacement 7
Fuses specifications 6
G
General Description 4
General Information 3
H
Handling instructions 7
Handling Warnings 4
How to order 29
I
Internal Wiring Schematic 24, 25, 26
M
Meaning of external command 9
Monitor signals 16
P
Physical characteristics 6
Pin out of CONN. #1 20
Pin out of CONN. # 2, 3, 4 21
Pin out of CONN. #5 22
Pin out of serial lines connectors 23
Power-up procedure 8
R
RoHS conformity 2
S
Software Specifications 11
Software upgrading 17
T
Technical Assistance 29
U
User Interface 10
W
Warnings 3
Wiring instructions 7
Working modes 9
General Informations
This equipment satisfy the European Standard EN 61010-
1 (=CEI 66-5) (=IEC 1010-1) approved by CENELEC on
9/3/1993.
With reference to EN 61010-1 standard, note:
this appliance must be installed and serviced only by qualified
personnel.
The appliance must only be used by persons acquainted with
the regulations covering the application.
Note about EMC regulation: the generic emission standard
EN50081-2 (title: Electromagnetic compatibility - Generic
emission standard - Part 2: Industrial environment) sets that
“Where a relevant dedicated product or product-family EMC
emission standard exists, it shall take precedence over all
aspects of this generic standard”.
The equipments described in this manual have been classified
as industrial, scientific and medical (ISM) radio-frequency
equipments and the related standard for the emission is the
EN55011 (title: Limits and methods of measurement of radio
disturbance characteristics of ISM equipment.)
With reference to EN55011 standard, this equipment is inclu-
ded into Group 2 (Microwave generators, Thyristor command
equipment, Welding equipment, Induction heating equipment
or machine, Microwave industrial oven, etc.), Class A (indu-
strial environment): for this reason this equipment shall not
be used in the residential, commercial and light-industrial
environment.
The SM1150x and TM030, when properly installed, complies
with the limits of radio disturbance characteristic of a Group2,
Class A equipments as stated by EN55011.
Copy of the tests performed may be sent on request. Be aware
those tests cannot be used as a conformity certificate of the
user’s final equipment.
WARNINGS
The SM1150D/T are powered by industrial main line and
has high voltage output (close 5 kV): read carefully this
manual before using. Be sure of correct connections and
use.
Failure to comply with the instructions enclosed in this
manual may involve considerable risks for the staff respon-
sible for checking and using the equipment, as well as the
risk of general malfunctions of the equipment itself.