Altech DSD 4921 RV, Руководство пользователя, Страница: 23 / 52

21
8 GENERAL FUNCTIONS
Standby/Power On
The
“
Standby/Power On
”
button
“ ” key on the RCU places your Set Top
Box into standby or powers up the Set Top Box to resume watching TV
(ensure your TV is also ON).
Volume Control
Pressing the
“
VOL
” buttons“ ” or “ ” on the RCU to increase or decrease
the volume. A volume bar shown on-screen indicates the volume level.
Mute Key
Pressing the
“
MUTE
” button “ ” on the RCU will mute the audio. A volume
mute bar as shown on-screen indicating the volume is in mute mode.
There are two ways to regain the volume:
1.
If the volume is muted, press the “ ” key again to regain volume.
2. If the volume is muted, press either the VOL
“ ” or “ ” keys to regain
volume.
Switching between TV and Radio Channels
Use the
“
TV/RADIO
” key “ ” to change between the TV Channels and
radio stations.
The radio screens and procedures are similar to your TV procedures in this
User Manual.
NOTE: If Red/White AV leads have been connected to an Audio amp or AV
receiver, these radio services can be played without requiring TV to be
switched on.
Error Banners
An error banner is displayed when there is a dish alignment or input error
from the user or in the instance where signal is lost.