Altech BT300i, Техническое руководство

Страница: 32 / 47

V1 JUIN 2010 ALTECH Generation ALL IN ONE Type Heat Pump Water Heater Technical Manual
32
2.2.4.4 Mode Selection
a) The unit is enhanced with three operation modes, Economy Mode, Hybrid Mode and E-heater
Mode.
b) Economy Mode: The unit heats water only by compressor drive according to heat-pump principle.
Used when the ambient temp. is high.
c) Hybrid Mode: The unit heats water not only by compressor drive but also by electric heater. Used
when the ambient temp. is low or large amount of hot water is needed.
d) E-heater Mode: The unit heats water only by electric heater. Used when the ambient temp. is very
low.
e) By default, the unit operates in Hybrid Mode.
Change:
Press the MODE key, operation mode will
be shifted among the three modes in a
cycle,
meanwhile the corresponding
indicator on the display will light up.
2.2.4.5 Temperature Setting
Temp displayed is the water temp. in the upper part of the tank. Default is 55 ℃ and the setting range is
38~60 ℃ .
Method for set.
Press the"UP" and "DOWN" key, you
can increase and decrease the water
temp setting.
High Temp
When the setting temp is higher than 50 ¡ æ
the Temp Operation Hign indicator will light