Altech BT300i, Техническое руководство

Страница: 30 / 47

V1 JUIN 2010 ALTECH Generation ALL IN ONE Type Heat Pump Water Heater Technical Manual
30
2.2.4 Operation Instruction
2.2.4.1 Preparation before running the unit.
a) When you run the unit for the first time, all the indicators on the UI will light for 3 second, and the
buzzer will “didi” ring twice at the same time, and then, display the fiducially web page. After no
operation for 1 minute, all indicators will go out automatically except Water fill indicator flashing
and Clock indicator lighting. Buzzer will “di” ring when you press it.
b) When the tank is full, please press the ON\OFF key, the Water fill indicator will stop flashing and
you can continue to function other settings. When all settings finished, please press the ON\OFF
key again and the Water fill indicator will go out. And then run the unit.
c) When the unit is running, if there is no operation or malfunction for 20s, the backlight of the display
will go out automatically except Clock indicator and Water fill indicator. If there no operation for
1min, the unit will lock automatically, but the lock indirator would be right all time.
2.2.4.2 Lock and Unlock
In order to prevent wrong operation, a special lock function has been designed. If there is no operation for
1min, the unit will be locked automatically, and display the lock sign (Lock indicator lights up).When the unit
is locked, no keys can be operated.
Press the CANCEL key 3s, the unit will
be unlocked, the LOCK sign disappears
and all keys can be operated normally
2.2.4.3 Clock Setting
The clock is for a 24-hour system and the initial time is 00:00. To make a better use of this unit, it is
recommended to set the time for accurate local time. Every time powered off, the clock will be reset to the
initial time 00:00.Method for time set