Altec SOUNDBLADE IMW545, Руководство пользователя

Страница: 5 / 16

Charging Your Speaker
1. Connect one end of the included USB Charging Cable to the USB Charging Jack. Then plug the other end
of the USB Charging Cable into one of your computer’s available USB ports to recharge your speaker’s internal
rechargeable battery.
NOTE: The internal battery of your speaker takes approximately two to three hours to charge when completely
drained.
2. When charging, a red LED light will illuminate. The red light will turn off when your unit is fully charged.
Understanding the LED Status Indicators
1. Bluetooth Connected: Once your speaker is paired to a Bluetooth audio source, a blue LED light flashes
once every 5 seconds.
2. Incoming Call: A blue LED light flashes twice every 5 seconds to indicate that you are receiving an
incoming call.
3. Low Power Alert: A red LED light will blink and you will hear a beeping noise every minute when your
speaker’s battery power is low and needs to be recharged.
4. Charging: When charging, a red LED light will illuminate. The red light will turn off when your unit is fully
charged.
5. Powering On: When powered on, a blue LED light will flash five times.
6. Powering Off: When powered on, a red LED light will flash three times.
7. Pairing: When your speaker is ready to pair with a Bluetooth audio source, red and blue LED lights will flash
alternately.