CONNECTION
1-
The tightening of the screws on
the front acts directly on the switch
of the tamper against forced opening.
Important:
Verify the proper
operation after installation by
unscrewing the screw.
3-
Position to the screw of tamper
against forced opening
2-
Internal battery 12 VDC – 2 Ah
4-
Supply voltage (limited to 100mA)
12 to 14.5 Vdc
5-
0 Volt
6-
Blocking tension (9 to 16 Vdc)
7-
Loop of auto-protection
INSTALLATION
SI-MAX is provided exclusively for indoor use. It
is installed to a vertical wall and flat surface
greater than that of its body, leaving at least 2
cm on each side. Drill the mounting holes along
the drilling template. Fix the chassis of the SI-
MAX using 4 screws round head diameter of 4 to
5 mm (not supplied). Use a screw 4 to 5 mm in
diameter (not supplied) for the tamper against
forced opening and set it as shown above-cons
without pushing on the electronic card.
It is imperative to conduct tests and verify the
proper operation of the alarm’s sound and of the
auto-protection after the installation.
It is strongly recommended to periodically check the proper tightening of connections
and the condition of the internal battery and replace it if necessary
SAFETY
•
During the test, wear a hearing protective helmet or hold you at a reasonable
distance of the SI-MAX.
•
Avoid any intervention on the SI-MAX by stormy weather.
•
Use only the type of the batteries indicated on the specifications table
Destruction of the batteries
The battery backup of the SIMAX is not provided by ATLS. However, do not dispose of
batteries in your trash, it is forbidden to cremate, bury them or throw them into
landfills. Dispose batteries according to the current laws and regulations.Please contact
relevant authorities for further information on the arrangements put in place in your
region to collect, recycle and dispose of used batteries.
Destruction of the product
As required by the WEEE (Waste Electrical and Electronic Equipment),
electrical and electronic equipment must be disposed separately from normal
household garbage to promote the reuse, recycling and other forms of
recovery, as well as limit the amount of waste requiring disposal and thereby
reduce the landfill. When disposing of such products, please follow the
instructions of local authorities and / or check with your dealer when
purchasing a new product.
WARRANTY
ATLS provides a guarantee of 5 years from the date of the manufacture.
The year and month of manufacture appear on the label serial number
placed inside the device.
The warranty does not cover non-functional damage such as scratches,
broken by a fall or shock or degradation caused by abnormal use.
The guarantee applies only to cards and electronic assemblies and does not cover
damage caused by natural or artificial surges.
The guarantee applies only if the electronic part has not been dismantled, disturbed or
transformed.
The warranty is strictly limited to repair or exchange parts that we found defective.
Return costs are still borne by the sender.
The detention of equipment under warranty won’t give rise to any compensation for any
reason whatsoever.
The responsibility of A.T.L.S. is limited to the repair of products and do not extend to the
consequences of their use, their implementation or their non-functioning.
.
