• Launch your
browser and go to
http://192.168.1.12
• You will see the
“inAir-Setup”
home page.
• Name successfully
changed.
• Enter a name for your
device
• Press
APPLY.
• Choose your home
network, enter your
password.
• Press
JOIN.
• Launch iTunes or play
music from your iOS
device.
• Look for the AirPlay icon
at the bottom right of
your iTunes window.
• Please check support.
alteclansing.com for
current updates.
®
™
Quick Connect Guide
inAir Guide app for your iPad,
®
iPhone,
®
and iPod
®
touch
The inAir 5000 LED is a helpful tool. Here’s what it means:
Flashing Blue
Blue
Flashing Orange
Flashing Green
Flashing Purple
Flashing Red
Before we begin.
• You need a Wi-Fi network to proceed.
• Make sure iTunes (10.1 or later) is running on your computer.
• Have your Wi-Fi network name and password ready for reference
• For information on alternative setups and fi rmware updates, please visit the
online user manual at: support.alteclansing.com
Connect your devices.
• Disconnect any Ethernet or power cables on your inAir 5000.
• Reconnect the power cable to your inAir 5000 and power it ON.
• Wait for the LED on the player to start fl ashing purple. (About 30 seconds)
• Press the “Wi-Fi Connect” button on the back of your device. The LED will
begin to fl ash orange.
• Go to your system’s Wi-Fi settings and select “inAir-Setup’. You will be
temporarily disconnected from your home network.
• The LED will change to solid blue. This confi rms that you have entered
“inAir-Setup.”
1
3
5
7
4
6
2
Setting up your inAir 5000 remote.
• In iTunes, go to preferences and select ‘devices’.
• Select the check box for ‘allow iTunes audio control from
remote speakers’.
• Look for the AirPlay icon
at the bottom right of iTunes,
click and select your inAir 5000.
Start playing music!
For additional information, please visit:
support.alteclansing.com
RECOMMENDED SETUP
If the LED begins to fl ash purple, there is a problem connecting to your home network. Usually this is caused by
an incorrect password. Follow these easy steps.
• Press the “Wi-Fi Connect” button, located on the back of your device.
• Wait for LED to start fl ashing orange.
• Starting from Step 2, go to your system’s Wi-Fi setting and select “in Air- Setup”
• Repeat the steps as instructed.
Connecting
On / Connected
Access Point Mode
Applying Update
No Network Detected
Firmware Error
Color
Meaning