User Manual EasyDrive Version 4.0
8
Installation under Windows NT
Step 1:
Start Windows NT
You need a supervisor password to carry out the installation.
Step 2:
Copy the driver files as follows:
◆
Insert the altec Support Disk in drive "A:".
◆
Open the Control Panel with START ->SETTINGS -> CONTROL PANEL.
◆
Click SCSI to view the "SCSI" properties and choose the "Driver" tab. The click
"Add".
◆
Choose "Diskette" in the next dialog box and choose the sub-directory WINNT.
◆
Follow the instructions on the screen.
Step 3:
Restart the computer:
◆
After installing the driver, it is necessary to reboot the PC to load and activate
the driver. Close all currently running programs and restart Windows.
Installation under Windows 2000 or XP
Installation under XP and 2000 is very similar and differs only in a few dialog boxes.
Accordingly the following section jointly describes installation for both operating
systems and indicates the differences where applicable.
Step 1:
Start Windows 2000 or XP.
You need a supervisor password to carry out the installation.
Step 2:
Copy the driver files as follows:
◆
Open the device manager with START -> SETTINGS ->
CONTROL PANEL-> ADMINISTRATION -> COMPUTER ADMINISTRATION -> DEVI-
CE MANAGER
