User Manual EasyDrive Version 4.0
11
5.2 Removing a PC Card
Press the respective eject button to remove the PC Card from the slot. Use the left
eject button for the top slot and/or the right eject button for the bottom slot. Make
sure that the red LED on the front panel of the drive is not lit when you remove the
PC Card.
Under Windows NT, 2000 and XP, you must "unmount" (eject) the memory cards
before you remove them. Typically, this is done by clicking on a button on the task bar
at the bottom right of the screen.
6. Technical Specifications EasyDrive
Memory card slots
2 x PC Card Type I or II – or 1 x Type III f0r SRAM and ATA
Flash PC Cards or HDDs in PC Card format
Interface
40-pin IDE; 2.54 mm pin spacing
Max. cable length: 40 cm
Slave or Master use
Supported OS
Windows 95/98, ME, NT, 2000, XP and MS-DOS, OS/2,
Windows 3.x
Dimensions
standard 3.5" drive dimensions
101,6 mm x 25,4 mm x 149 mm (WxHxL)
Temperature
0°C to +70°C (operating)
–20°C to +70°C (non-operating)
Humidity
0 to 90% (non-condensing)
DC input voltage
5Volt ±5%
Power consumption
approx. 15–50 mA (w/o memory)
