WIRED CONTROL
-
The first tests should always be carried out with the wired control, which is also used in the event of radio failure and for all the
finalizing.
-
The wired control is connected using the 24-pin IPRA port in place and instead of the radio control.
-
The steel cable must be attached to the machine with the shackle provided.
-
The commands of the radio control have identical abbreviations and markings; only the start-up mode is different (see the radio
control instructions).
Movement
control
Forwards
Backwards
Radio control
on/off and
(Hydraulic unit
stop)
Emergency
stop
Belt speed
control
Right left
rotation
(OPTION)
Unwinder
control
Forwards
Backwards
Hydraulic unit
start
Movement
speed
control
