© 2003 Altec Lansing Professional
y
1000 W. Wilshire Blvd., Suite 362
y
Oklahoma City, Oklahoma 73116
Phone: 1.405.848.3108
y
Fax: 1.405.848.3217
y
Email: [email protected]
6125A Revision 01
Rear Panel View
ARCHITECT’S AND ENGINEER’S SPECIFICATIONS
The power amplifier shall be a multi-channel unit with six independent channels. Each amplifier channel shall be able to deliver 150 watts
into 8 ohms or 250 watts into 4 ohms. In addition, channel 1+2, channel 3+4, or channel 5+6 shall bridge into 8 ohms to deliver 500 watts.
Each amplifier channel shall have a gain of 30dB, an input sensitivity of 1.05VAC RMS at full-rated output and be stable into any load,
including pure capacitors and inductors. The power amplifier shall have six detented attenuators, one for each channel. Each pair of
channels shall have a switched high-pass 50Hz filter, stereo or mono mode, and dual or bridged mode.
The inputs shall be active balanced with an input impedance 10k ohm from a single Euroblock connector. All six amplifier outputs shall be
accessed by simple and reliable terminal strip connectors. Each amplifier channel shall have front panel LED indicators for protect, thermal
overload, clip, and signal presence. A temperature sensitive 3-speed cooling fan shall draw air through the front panel and exit the back.
The power amplifier shall be no higher than three rack spaces and must be fully covered with a five year warranty. The dimensions shall be
19 inches (48.3cm) wide by 5.25 inches (13.3cm) high by 16.5 inches (41.9cm) deep. The power amplifier shall weigh 45 pounds (20.4 kg).
The power amplifier shall be the Altec Lansing Professional model 6125A
.
As we are continually striving to improve Altec Lansing products, specifications are subject to change without notice.
VISIT WWW.ALTECPRO.COM FOR
•
Specification sheets in .pdf format. Download page 1 of the specification sheet for you submittals.
•
One paragraph A&E Specifications in .doc format
Mixer
1 2 3 4
6125A
Bridged
L
R
Center
Left - Center - Right
5 6
Foyer (L+C+R)
150W
150W
125W
125W
500W
150W
(L+R)
CD912-8A
4048A
CD912-8A
