Step two-Hitch assembly
installation
•
Align the vertical beam pivot point (1) with hitch pivot
point (2) and interior plate
•
Drop the main beam in to the round grove of the
interior plate and align with holes on the receiver
hitch.
(1)
(2)
(3)
•
Install the 5/8 bolt wit h washer on one side and
washer and lock washer with nut on the other side(3)
•
Using two 15/16 wrench or two crescent wrench
tighten the main pivot bolt and nut.
•
Tighten until you meet major resistance, this is
adjustable, and can be tightened further once
installed
