7
MULTICHANNEL POWER AMPLIFIER V1.1 web
4. WORKING
PRECAUTIONS
The manufacturer cannot be held responsible for any damage that is incurred by not using the
power amplifier in compliance with the warranty or working precautions.
DANGER:
High voltage inside the amplifier. Do not open! The power amplifier doesn't
contain parts that can be repaired by the user. The power amplifier could have electric
power stored in their interior even disconnected it from the mains.
CAUTION:
Protect the power amplifier from the rain and moisture. Ensure that no
objects or liquids enter it. If liquid is spilled into the power amplifier, disconnect the power
amplifier from the mains and consult a qualified service technician.
Don't place the power amplifier close to sources of heat. Also make sure that the front, lateral and
the rear panel there are free of obstructions, since the fan could not work properly and cause the
thermal protection work.
DANGER:
The power amplifier output connectors could have high voltage. Make sure of turning off
the power amplifier before handling on these output connectors.
5.
INSTALLATION
UNPACKING
Before leaving from factory, each power amplifier was carefully inspected and tested. Unpack
and inspect the power amplifier for any damage that may have occurred during shipment. If any
damage is found, doesn't connect the power amplifier to the mains, notify the sales person
immediately, because the unit must be inspected by a qualified service technician
Save the original packing, you could use if you need to transport the power amplifier.
NEVER
SHIP THE POWER AMPLIFIER WITHOUT IT'S ORIGINAL PACKING.
MOUNTING
It is always advisable to mount the power amplifiers in rack, either for mobile or fixed
installations, for protection, safety, aesthetics, etc.
The MULTICHANNEL series power amplifiers are designed for standard 19" rack mounting,
and occupy 2u high rack space.
Due to the weight of the unit, it should be securely fastened at the front and the back of the
cabinet. If the racks are carriage ones, it is advisable that have trays in order to allow the power
amplifier to rest on its base and in an elastic cradle, if possible. It is advisable, leave a separation
space between amplifiers and other units in order to facilitate its cooling, upon mounting the amplifier
in a rack.
In the mounting, either fixed or in rack, the cooling vents placed in the front, lateral and rear
panel should be free, so that the air circulates freely, and the amplifier could have a better heat
