14
MULTICHANNEL POWER AMPLIFIER V1.1 web
OUTPUTS 3 AND 4 (7 AND 8) LIKE 1+2 (LIKE 5+6):
We have connect loudspeakers in OUTPUTS 3 and 4 (7 and 8), the signal that we want amplify
connected to CH1 and CH2 (CH5 and CH6).
The level is controlled from CH3 and CH4 (CH7 and CH8)
The connection diagram is similar to the previous one but we must put the switch towards left
HIGH PASS FILTER (HPF)
An active filter 12 dB/oct Butt. type is built in, tuned at 100Hz high pass filter as factory default.
By demand, filter structure, normally configured as HPF can be turned to LPF characteristic. The
cut-off frequency can also be changed to a different one.
If you want more information go to
SPECIAL OPERATIONS - FILTER CHANGE, FRECUENCY, HPF,
LPF
.
Main application is to drive systems with satellites (in HPF mode) and subwoofer in full range.
DISABLED 100 HZ HIGH PASS FILTER
