5
REAR PANEL — EM-202-5P VERSION
- MALE & FEMALE XLR 5-PIN INTERCOM LINE CONNECTORS .
3. WORKING PRECAUTIONS
The manufacturer is not responsible of any damage that can possibly happen to the dual channel
beltpack outside the limits of the warranty or those produced by not taking care of the working
precautions.
The intercom line DC voltage must be between the limits of the admitted power supply (12-30 VDC).
The damage caused by a connection to an improper line DC voltage is not covered by any warranty.
DANGER:
Inside the unit there are high voltages, do not open it. The unit does not contain
elements that could be repaired by the user. Whenever the dual channel beltpack is
connected to the intercom lines, it carries elements with high voltages. In order to
disconnect the unit completely, you must disconnect it from the intercom lines.
CAUTION:
Protect the unit from the rain and moisture. Ensure that no objects or liquids enter it. If liquid
is spilled into the unit, disconnect it from the mains and consult a qualified service technician.
Do not place the unit close to heat sources.
4. INSTALLATION
UNPACKING
Before leaving the factory, each dual channel beltpack has been carefully inspected and tested.
You can unpack and inspect the unit for any damage that may have occurred during shipment. If
any damage is found, does not connect the unit to the intercom line; notify the salesperson
immediately; a qualified service technician should inspect the unit.
Save the original packing, you could use if you need to transport the unit.
NEVER SHIP THE
DUAL CHANNEL BELTPACK WITHOUT ITS ORIGINAL PACKING.
INTERCOM LINE CONNECTION
The intercom line connection in the dual channel beltpack model EM-202-3P is carried through
twin-lead shielded cable and male or female XLR 3 pin connectors. The dual channel beltpack
provides one female XLR 3 pin connector (LINE A) and a male XLR 3 pin connector (LINE B), wired
DUAL CHANNEL BELTPACK EM-202
