TPS13-001_rev1_4_A8n_series_Installation_Guide_for_FCC.doc
Commercially Confidential
10
2.1
A8-Ein Base Station Mounting Kit
A
Main mounting module
B
Mounting back plate
C
4x mounting screw and nut
D
4x locking screw
Figure 3. A8-Ein Base Station Package
2.2
Mounting A8-Ein on Pole
1.
Assemble the mounting kit according to Figure 4 with one side of the screw installed.
2.
Mount the kit to the pole at the desired height and tighten all 4 screws to fix its position
(Figure 5).
3.
The mounting kit must be installed with the key hole pointing down (Figure 6).
4.
Clamp the A8-Ein unit to the mounting kit, as shown in Figure 7 and make sure the
mounting screw is locked in the key hole.
5.
Screw in 4 locking screw to secure A8-Ein with the mounting kit (Figure 8).
A
B
A
C
D
