Altai Technologies Ltd. All rights reserved
A8n Series Super WiFi Base Station Installation Guide
TPS13-002_rev1.0
C
4x mounting screw and nut
D
4x locking screw
Figure 2-3 A8Ein Mounting Kit Packages
2.3.
Mounting A8Ein on Pole
Assemble the mounting kit according to Figure 2-4 with one side of the screw installed.
Mount the kit to the pole at the desired height and tighten all 4 screws to fix its
position (Figure 2-5).
The mounting kit must be installed with the key hole pointing down (Figure 2-6).
Clamp the A8Ein unit to the mounting kit, as shown in Figure 2-7 and make sure the
mounting screw is locked in the key hole.
Screw in 4 locking screw to secure A8Ein with the mounting kit (Figure 2-8).
Adjust A8Ein tilting by relaxing the pair of tilting screws and tighten them back when
the angle is fixed (Figure 2-9).
The mounting kit will fit with pole diameter from 1 inch to 3 inches.
