Alpine TMX-R1100E Скачать руководство пользователя страница 16

INSTALLATION AND CONNECTIONS

INSTALLATION BY BRACKET,
TRIM RING (*1,2)

FIXING BRACKET

When remove ROOM LAMP for installation.

Use the screw hole that fixed ROOM LAMP
to attach the BRACKET.
*For vehicle with ROOM LAMP fixed with clip,
  please find Speed Nut separately.

CUTTING TRIM RING.

Use TRIM RING to fill the gap when there is a
gap between Roof Panel and Monitor.
*No need to use TRIM RING if there is no gap.
*Cutting POSITION and SHAPE differ from
   vehicle, please carefully check before cutting.

1. Using Masking
    Tape to mark
    according to
    the shape of
    the Roof Panel.

Vehicle Roof Panel

Masking Tape

2. Use Air Saw or
    Cutter to cut along
    the Marking

MONITOR INSTALLATION

Fix to the BRACKET.
*Be careful not to route the wiring in obstruction
  to the installation.

FIXING TRIM RING.

*No need to install if TRIM RING is not necessary.

16

 

 Caution  

Specific knowledge and experience     

                       are needed for this installation.    
                       Please contact to your dealer.

 

 

 Caution     

Do not use electric driver.

 

It is difficult to control the torque of 
electric screw driver; it will not only 
damage the screw head but also the 
vehicle as well. 

INST

ALLA

TION AND 

CONNECTION

Cutting Position

BRACKET

Screw (M4 x 6)

M4 x 6 (5 PCS)

Rubber Cap

Rubber Cap (5 PCS)

Screw (M3 x 6)

M3 x 6 (9 PCS)

TRIM RING

CAUTION

*It might not be possible to tighten the screw for
vehicle with a gap that the Roof Inner Panel that
fixed with ROOM LAMP. In such case, please
use additional spacer to tighten the screw firmly.

Spacer                               Room Lamp

                                          Fixing Panel

                                          BRACKET
             Fixing Screw

Please firmly tighten fixing screw.

The monitor could fall down if insufficiently

tighten

Be careful with the screw size.

The monitor could fall down if use the screw

size that is smaller than the fixing hole.

WARNING

CAUTION

Be careful with the screw length.

Using the screw that is longer than the space

between the hole and roof top could damage
the vehicle.

WARNING

Please use provided screw to firmly install.

Monitor may fallen down if insuffiently

tighten.

Please firmly fix the TRIM RING then cut.

This could cause injury if not fixed firmly.

WARNING

Содержание TMX-R1100E






















Отзывы: