10
-EN
Other Useful Features
SET UP
PWR
V. SEL
9
8
/
-
Selecting Rear Monitor
This unit has controls to switch the video and
audio to a rear monitor if another (rear) monitor
is connected.
NOTE
After carrying out the steps 1 to 3 of "Viewing the
switching display modes" described on page 6, perform
the operation shown below.
1
Press the SET UP button.
2
Press the
9
or
8
button within 10 seconds and
select AUX OUT.
3
Press the
4
or
3
button within 10 seconds to
carry out selection.
LINK:
Output the video/audio portion shown on the main
monitor, to the rear monitor.
NAV.:
Output the navigation video/audio to the rear
monitor. (Only when navigation unit is connected).
AUX 1:
Output the AUX 1 video/audio to the rear monitor.
AUX 2:
Output the AUX 2 video/audio to the rear monitor.
4
Press the SET UP button to finish adjustments.
SET UP
AUX1
BRIGHT 0
COLOR 0
TINT 0
AUX OUT
LINK
L I N K
N A V . A U X 1 A U X 2
1
3
Setting the External Device
Interrupt Mode
When used in conjunction with an Ai interception
box (KCA-801B), the sound of a TV or an
external input sound can be intercepted to an
Alpine head unit. This function may not work
with some combinations of products. For details,
refer to the KCA-801B’s operating instructions.
NOTE
After carrying out the steps 1 to 3 of "Viewing the
switching display modes" described on page 6, perform
the operation shown below.
1
Press the SET UP button.
2
Press the
9
or
8
button within 10 seconds and
select OUT INT.
3
Press the
4
or
3
button within 10 seconds to
turn ON.
4
Press the SET UP button to finish adjustments.
SET UP
AUX1
DIMMER
AUTO
DIMMER Lv. -
OPEN/CLOSE
OFF
OUT INT.
ON
OFF
ON
2
3
