Owner’s Manual
Unpack all components carefully. Please check to ensure all parts have been
removed from the packaging.
How Your Solar Garden Product Works
Solar lights run by electricity generated through the solar panel to charge the
internal NI-CD rechargeable battery. Your new solar light will automatically
illuminate at night through light sensor technology. The duration of illumination
will depend on the amount and quality of sunlight the solar panel receives.
Components:
•
3 Solar Powered LED Lights
•
3 NI-CD Rechargeable Batteries
•
3 Light Stands
•
3 Light Stakes
•
1 Solar Panel Stake
•
Screws/Bolts
Diagram 1
Diagram 2
Using Your Solar Garden Product the First Time
●
Install your solar panel in direct sunlight and charge for a full 8 hours in
direct sunlight. Twist the shorter, solar panel stake, into the bottom of
the solar panel. Position where desired.
●
Once the solar light has been fully charged, the light will automatically
turn on at dusk.
Note:
Be sure to twist off the light cover and remove the
tab located near the NI-CD Battery cover.
•
When you unpack your new solar lights, the
ON/OFF
switch (located on
the Solar Panel) will be in the
OFF
position.
Leave the switch in the
OFF position for 8 hours, while the battery is charging.
•
To turn ON your new solar light, move the ON/OFF switch to the ON
position.
Inserting Stake Lights
Note: Refer to above diagram 1 for reference.
•
Choose if you would like to use the Light Stakes or the Light Stands.
•
To use the Light Stakes: feed the cord through the notches in the stake
for all 3 Lights and twist the stake into place. Securely stake the lights
into the ground
. Note:
Be sure to plug the cords of all 3 lights into the
solar panel.
Inserting Stake Lights Continued
•
Chose an appropriate, sunlit area to position your solar panel. Be sure
that the area is rock and debris free.
•
Let your solar panel charge for at least 8 hours.
•
Enjoy your Alpine Solar Lights!
° NOTE
(Refer to Diagram 2 above
): To replace your NI-CD Rechargeable
Battery, Open the Battery cover on the Solar Panel. Replace Battery with
Alpine NI-CD Rechargeable Battery. Replace Battery Cover.
•
To use the Light Stands: feed the cord through the large hold in the Light
Stand and twist the stand into place. Use your own screws to bolt the
stands into the ground.
Note:
Be sure to plug the cords of all 3 lights
into the solar panel.
Trouble Shooting & Caution
If you have any questions and/or problems, please contact the retail store where
you purchased this light.
If Your Solar Garden Product Fails to Illuminate
•
Be sure that the solar panel is in direct sunlight.
•
Do NOT
leave your solar light underneath a night time light
source, such as a street light, as this will prevent the light from
switching on at night.
•
Be sure the switch is in the ON position.
•
Your garden lights are sprinkler and rain resistant. Periodically
wipe away dust, debris, or snow that may have gathered on the
solar panel, to ensure full charging of the batteries.
•
Your garden lights are sprinkler and rain resistant. Periodically
wipe away dust, debris, or snow that may have gathered on the
solar panel, to ensure full charging of the batteries.
•
Test the solar panel by covering it with your hands to see if the
light turns on, if it does not check the battery to be sure it is
intact.
•
If your battery is intact, but does not appear to work properly,
dispose of it and replace it with a new Alpine Rechargeable
Battery.
Caution
o
Do not operate in water.
o
Store the unit in a dry place if not in use for an extended
period of time.
o
Dispose of all batteries properly.
o
DO NOT DISPOSE OF BATTERY IN FIRE.
