6
PAIRING AND USING YOUR SPEAKER(S)
CHARGING THE SPEAKER WITH A MICRO USB CABLE
CHARGING THE SPEAKER WITH THE SOLAR PANEL
Prior to using your Solar Bluetooth Lantern Speaker for the first time, it
is recommended to charge the battery fully.
To charge the speaker, place the speaker so the solar panel is under
direct sunlight or bright indoor light. Recommended charge time using
the solar panel is 8 hours, but charge times may vary depending on
weather conditions.
It is important to charge the speaker for at least 8 hours before using it
for the first time.
1. Open the back cover protecting the Control Panel. Plug the small
end of the included Micro USB Charging Cable into the Micro USB
Port on the back of the speaker.
2. Plug the large end of the USB charging cable into your computer
or other USB charging device. Recommended charge time with a
USB cable is 4-6 hours.
3. When charging is complete, remove the Micro USB charging cable
from the speaker.
About the Control Panel
Power Button:
Push to turn the speaker power on or off.
Function Button:
Press once to pause music. Press again to resume
playback. Press and hold to begin pairing two SKY426SLR speakers
to each other.
Charging Indicator Light:
Lights RED when the speaker is charging
and turns to GREEN when it’s fully charged.
Bluetooth Indicator Light:
Flashes BLUE when pairing to a speaker
or Bluetooth device and lights steady BLUE when connected. When
two speakers are paired the main speaker flashes BLUE and the sub
speaker lights steady BLUE. During Playback Indicator lights will flash
BLUE.
