9
PAIRING AND USING YOUR SPEAKER(S)
TROUBLESHOOTING
Speaker(s) Not Connecting to Bluetooth Device
• If your device does not show “
Alpine Corporation”
in your
Bluetooth List:
-
“Alpine Corporation” will not appear in your Bluetooth List when it is
connected to another device.
-
Check all previously connected devices to the speakers are all
disconnected. Remove “Alpine Corporation” from your Bluetooth List.
• Make sure your speaker(s) have sufficient power, the Power Button
is in the ON position and the LED Indicator Light is flashing BLUE.
-
If the speaker doesn’t have enough power, it will beep every 30
seconds. Charge your speaker fully before pairing your device.
-
When the Speaker is charging by Micro USB the Charging Indicator
light turns RED. When the Speaker is fully charged the Charging
Indicator light turns GREEN.
• Make sure your Bluetooth device is turned on, is set to search for
devices and is located within 3 feet of the speaker.
Pair the Speakers Back to One Device
1. If the speakers were previously paired together to one device, just
disconnect the second device. On that device’s Bluetooth settings,
select “Alpine Corporation” and press unpair or disconnect.
2. The two speakers will automatically pair together and play the
same music controlled by the first device.
NOTE:
If the speakers do not automatically pair:
1. Press and hold and the Function Button on the main speaker to
start the pairing process.
2. After a successful pairing, you will hear a tone and the Bluetooth
Indicator Light will flash BLUE on the main speaker and the sub
speaker’s Bluetooth Indicator Light will light steady BLUE.
