background image

 

Warning

This sign indicates important indications. Serious 
injury or death may be incurred if you don't pay 
attention to it.

When a problem occurs, stop using it 

immediately

Please return this product to Alpine's authorized 
dealer, or to a nearby Alpine service center for repair.

Don't use any function that will distract you 

while driving

Any operation with a function that would affect your 

attention must be carried out after the car has been 
completely stopped. To use these functions, you must 

always park your car in a safe place firstly. Otherwise, 

an accident will probably be incurred.

You must keep a proper volume level while 

driving to make sure you are still able to 

hear the noise outside the car

If the volume is too high so that you cannot 

hear the alarm of emergency vehicle and road 

warning signals (train crossing, etc.), it will be 

dangerous and may result in an accident. In 

addition, listening in at high volume in the car 

can cause hearing damage.

Don't disassemble or transform

Otherwise, accident, fire or electric shock will probably 

be incurred.

Keep children away from small objects such 

as bolts or screws

Swallowing small objects can cause serious injury. If it 
is swallowed by mistake, consult a doctor at once.

This product shall be applied to a 12V type 

car

Fire, electric shock or other injuries may result from 
usage of another type of car.

  

Caution

This sign indicates important indications. Injuries 
to people or damage to equipment may be 
incurred if you don't pay attention to it.

Product cleaning

Please clean this product regularly with a dry soft 

cloth. If the dirt is difficult to remove, please wet the 

soft cloth with water only. Any other solvent may 
dissolve it.

TT

emperature

Before starting this device, make sure the temperature 
in the car is b60°C and -20°C.

Installation position

Ensure that the device is not installed in any of the 
following places:
• Places under direct sunlight and near heat source
• Places with high humidity or near water source
• Dusty places
• Places with violent vibration

Repair

If you encounter any problem, please do not repair 
it by yourself. Please return this product to Alpine's 
authorized dealer, or to a nearby Alpine service center 
for repair.

Certification

The text marks and logo of 

Bluetooth® are the 

registered trademarks of Bluetooth SIG.
The relevant literal symbols and logos used by Alpine 
have all been authorized.
Other trademarks and trade names are owned by their 
respective owners.

1

Operating Instructions

Содержание PXE-R600


















Отзывы: